Bolid S2000-2 User Manual download pdf (Page 33)

S2000-К Programming

33 www.bolid.com

control command. The procedures of programming user rights are common and out of the scope of

this Manual.

If the S2000-K is used for authorized access requests, each user should be assigned to an access

code for passages through the specific doors. An access code can be used both for access control

and arming/disarming the S2000-K.

Keypad rights are defined by specifying in the controller database the list of partitions which can be

managed using the S2000-K. There are two ways for users to be authorized by the system to enter

partition control commands using the S2000-K. The first way is to enter a digital PIN code directly

from the S2000-K keypad. The second way is to present an electronic access device (iButton or Prox-

imity card) to a reader connected to another device in the same RS-485 bus (such as S2000-4,

S2000-2, S2000-KDL, etc.) and then operate the S2000-K to control available partitions. The last

combined mechanism provides both enhanced security due to using electronic access devices and

flexible and versatile control enabling users to select partitions and actions individually via a menu

and to track system responses on the keypad LCD.

For the PProg, the keypad rights are programmed using the Device Rights tab (see Figure 5). The

upper window will contain the list of devices enrolled in the console database, the bottom window dis-

playing the list of system partitions.

Figure 5

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 49 50

No comments

Bolid S2000-2 User Manual Page 33