Bolid S2000-2 User Manual download pdf (Page 16)

Orion ISS

www.bolid.com 16

OPERATION MODES

The controller can operate in one of the following modes:

− Two Entrance Doors

− One Entrance/Exit Door

− Turnstile

− Swing-beam Barrier

− Two Sluice Doors

Two Entrance Doors Mode

In this mode the controller provides access via two independent access points (doors), with passing

being controlled via key presenting for one direction (entry) and being free by EXIT button pressing for

another (backward) direction.

Standard time to pass after access being granted is 10 seconds.

In this mode alarm loops are not involved in the access control strategy. Its can be used within the

integrated security systems for intruder alarm purposes.

If door sensors are connected to the relevant terminals of the controller and the controller is pro-

grammed to use these ones, some extended features are available for the S2000-2 controller, among

them:

− PASSAGE messages are generated and transmitted (when the S2000-2 operates on-line) to a

network controller

− While access is granted, the relay can be activated not only for a time defined by its Relay Acti-

vation Time parameter (a constant), but also can be adjusted to cancel executive program just

after door opening or closing (see ‘Switch Off After…’ parameters, Relay Configuration Parame-

ters Section of this Manual)

− Door Held or Forced Open events are monitored for

− While access is granted, the reader green LED lights for a time relevant to actual passage time.

If door sensors are not in use, the reader green LED lights for a time defined by the Relay Acti-

vation Time parameter, but at least for two seconds, regardless of the time the passing actually

takes

In order to pass in forward direction, a User key with the Access attribute set is to be presented to the

reader mounted near the door.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 99 100

No comments

Bolid S2000-2 User Manual Page 16